MIT OpenCourseWare

教學大綱


本頁翻譯進度

燈號說明

審定:無
翻譯:龍海曌(簡介並寄信)
編輯:馬景文(簡介並寄信)
(編註:輔助教室
編輯所設置自學書院網站設有本課程的輔助教室,內容包括部份閱讀文章的翻譯本,中文文獻連結,和自學者論壇。)

課程描述

學生將觀賞傢俱幻燈片,出席講座,講座的主題有:傢俱製造,中國古建築,日本伊勢神宮,美國殖民地式建築,夏克式(震顫派)傢俱,工藝美術運動,包豪斯學派,建築師Saarinan、Alto和Reitveld。還會參觀波士頓美術館的裝飾藝術展。

課程先概覽車間安全和工具、傢俱製造、接頭、傢俱製作技術和手工工具,然後著手兩個專題。第一個專題是燕尾榫接合的小盒子,只用手工工具製作。

學期專題要求學生原創一件傢俱,能支撑185磅的重量,支撑面離地面至少12英寸。學生先提交草圖,由教師和同學評審,然後設計、製作和完成作品。

課堂時間主要是學生獨立製作傢俱。不過,每星期,通常是星期三,會有工具示範或討論技巧,尤其是涉及學生專題的方面。還會實地參觀S&H公司的住宅建築地盤,以及本地傢俱製造車間或工廠。

課堂示範包括:木材特性,電動工具演示,機械演示,夾具製作,木材彎曲,推台鋸介紹,細木工,車旋,開槽,打榫眼,表面修整,砂光和表面塗飾。

完工時間大約在五月中旬,學期末舉行傢俱“燒烤餐”和展覽。



Description

Students will look at slides of furniture, and attend lectures on the following topics: Furniture Making, Ancient Chinese Construction, the Ise Shrine of Japan, Colonial American Construction, Shaker Furniture, the Arts and Crafts Movement, the Bauhaus, the architects Saarinan, Alto, and Reitveld. They will also take a visit to the Museum of Fine Arts, Decorative Arts Collection.

Two projects are undertaken in the class, after a general overview of shop safety and tools, furniture making, joints, furniture making techniques, and hand tools. The first project is a small dovetailed box, built using only hand tools.

For the term project, students design an original piece of furniture that will support 185 lbs. at least 12 inches off ground. Students produce a sketch that is evaluated by the teacher and classmates, and then design, build and finish the piece.

Class time is primarily taken up with students building their furniture individually. However, once a week, usually Wednesdays, a tool demo or discussion about a technique will be held, especially as it comes up around a student's project. Also, we take field trips to a residential construction site with S&H construction, and a local furniture making shop/factory.

Lecture demonstrations include the following: properties of wood, power tool demonstration, machinery demonstration, jig-making, wood bending, table saw introduction, joinery, turning, routing, morticing, shaping, sanding, and finishing.

The completion date is approximately mid-May with an end of semester Furniture "BBQ" and Exhibition.